BMW X3 Service & Repair Manual: Safety instructions for handling oil
WARNING: DANGER OF POISONING if oil is ingested/absorbed through the skin! RISK OF INJURY if oil comes into contact with eyes and skin!
Recycling: Observe country-specific waste disposal regulations.
Measures if oil is unintentionally released:
- Personal precautionary measures: Danger of slipping! Keep noninvolved persons away from the work area. Wear personal protective clothing/equipment.
- Environmental protection measures: Prevent oil from draining into drain channels, sewerage systems, pits, cellars, water and the ground.
- Limiting spread: Use oil blocks to prevent the surface spread of oil.
- Cleaning procedure: Bind and dispose of escaped oil with nonflammable absorbents.
NOTE: Do not flush oil away with water or aqueous cleaning agents.
Safety information for working on vehicles with automatic engine start-stop
function (msa)
WARNING:
If the engine hood/bonnet contact is pulled upwards (workshop mode), the
information "switch closed" is output. The automatic engine start ...
Front axle suspension
REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION
NOTE:
Illustration only an example. Detail deviations, depending on engine version,
a ...
Other materials:
BMW X3 Service & Repair Manual > Engine wiring loom: Removing and installing/replacing engine sensor system wiring harness module 1 (N20, N26)
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC
DISCHARGE (ESD PROTECTION) .
Necessary preliminary tasks:
Read out the fault memory of the DME control unit.
Switch off ignition.
Remove INTAKE PLENUM .
Overview, engine sensor system wiring harness modu ...