BMW X3 (F25) Service & Repair Manual: Springs with suspension

BMW X3 (F25) Service & Repair Manual / Suspension / Springs with suspension

REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT COIL SPRING

Installation note:

1. All screws, nuts, bolts and hose clamps removed during the repair must be replaced.

2. Retaining elements on chassis and suspension and steering parts must be replaced.

IMPORTANT:

  • Both coil springs on the relevant axle must be replaced in the event of corrosion breakage.
  • The spring pads at the top and bottom must also be renewed when replacing the coil springs.

NOTE: The process is described in THE REAR LEFT OR RIGHT SPRING STRUT.

After installation:

  • Check headlight adjustment, correct if necessary.
Shock absorber
...

Stabilizer bar
...

Other materials:

BMW X3 (F25) Service & Repair Manual > Electrical: Controller
REPLACING VOLTAGE REGULATOR Necessary preliminary tasks: Switch off ignition Disconnect battery negative lead Notes on removing and installing electronic control units. Remove alternator Bosch: Release protective caps (1). Bosch: Release screw (1) and nuts (2), remove cover. B ...