BMW X3 Service & Repair Manual: Shaped element
Shaped element Minimum set: Mechanical tools AM
NOTE: (Shaped element) shaped element (bearing shell) available as part of set of special tools 33 5 120 -> (83 30 0 495 851) only.
SI number
01 01 07 (333)
Shaped element AM
NOTE: For pulling the front rubber mounts out of the rear axle support, series: E36, E46
Storage Location
B13
C13
Shaped element AM
NOTE: For positioning the wishbone when pressing in the ball joint
Shaped element AM
NOTE: For pressing in
Shaped element AM
NOTE: For positioning when pressing out the ball joint
Shaped element AM
NOTE: For pressing in
Shaped element Minimum set: Mechanical tools Mechanical tool
NOTE: For pulling out rubber mounts in rear axle support mounting.
Storage Location
C29
SI number
01 22 11 (753)
Shaped element AM
NOTE: For pulling the rear rubber mounts out of the rear axle support, series: E36, E46
Storage Location
B13
Shaped element Minimum set: Mechanical tools AM
NOTE: Sale of existing inventory then available as part of set of tools 33 5 120 -> (83 30 0 495 851) only.
SI number
01 01 07 (333)
Screw
Screw AM
NOTE: (Knurled screws (M16 2 x))
Screw AM
NOTE:
(countersunk screws M10x30 (3 x)) Transmission: GS6-57DZ, GS6-53BZ (G
transmission) G ...
Shaped part
Shaped part AM
NOTE: (Shaped part)
Storage Location
Y8
SHAPED
Shaped part AM
NOTE:
For removing the wheel bearing inner race from the drive ...
Other materials:
BMW X3 Service & Repair Manual > Tpms reminder reset - procedure 7: Without iDrive
Indirect System (Flat Tire Monitor)
CAUTION: Do not initialize the system while snow chains are attached.
NOTE:
Each time a tire inflation pressure has been corrected or a wheel or tire has
been changed, reset the system.
Reset:
Start the engine.
Lightly push button 1 on the turn indic ...