BMW X3 (F25) Service & Repair Manual: Engine mounting

BMW X3 (F25) Service & Repair Manual / Transmission / Engine mounting

Replacing left engine mount (N20)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N47)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N52)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N55)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove rear UNDERBODY PROTECTION ASSEMBLY
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove GUIDE TUBE of dip stick.
  • Remove rear underbody protection.
  • Partially detaching the front left wheel arch panel.

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove THROTTLE BODY
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing left engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove left CHARGE AIR DUCT
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing right engine mount (N20)

Necessary preliminary tasks:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N47)

Necessary preliminary tasks:

  • REMOVE right engine support arm.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N52)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N55)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove the REAR UNDERBODY PROTECTION
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove REINFORCEMENT PLATE .

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Tire mounting paste
1.0 TIRE MOUNTING PASTE Use only a lubricant specifically designed for this purpose (former BMW Part No. 81 22 9 407 288). Wurth Tire Mounting Pas ...

Transmission suspension, automatic. transmission
...

Other materials:

BMW X3 (F25) Service & Repair Manual > Body and Frame: General information on preservation measures
The classic quality of BMW automobiles is based on the long-term comprehensive research and testing, the design, the applied materials and the manufacturing procedures in modern production plants. BMW recommends cleaning the engine, engine compartment, vehicle underside, axles and engine/tr ...