IMPORTANT: Use only the approved TRANSMISSION OIL in the transfer box.
Failure to comply with this requirement will result in serious damage to the transfer box!
NOTE: Only change oil when transfer box is at normal operating temperature.
Necessary preliminary tasks:
Check transfer case oil level, correct:
Undo oil filler plug (1).
Check transfer box oil level.
If necessary, pour in transmission oil up to lower edge of opening for oil filler plug (1).
Installation note: Replace oil filler plug (1).
Changing transfer case oil:
Place oil collecting apparatus underneath.
Remove oil drain plug (1).
Drain and dispose of transmission oil.
NOTE: Observe country-specific waste disposal regulations
Installation note: Replace oil drain plug (1).
Undo oil filler plug (1).
Pour in transmission oil up to lower edge of opening for oil filler plug (1).
Installation note: Replace oil filler plug (1).
BMW X3 Owners Manual > Universal Integrated Remote
Control: Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the LED
on the interior rearview mirror flashes. This erases all programming of the
buttons on
the in ...