BMW X3 Owners Manual: Sport displays

BMW X3 Owners Manual / Controls / Displays / Sport displays

The concept On the Control Display, the current values for performance and torque can be displayed if the vehicle is appropriately equipped.

Displaying sport displays on the Control Display

1. "Vehicle info"

2. "Sport displays"

Speed warning

The concept Displays a speed, when reached, should cause a warning to be issued.

The warning is repeated if the vehicle speed drops below the set speed once by at least 3 mph/5 km/h.

Displaying, setting or changing the speed warning

On the Control Display:

1. "Settings"

2. "Speed"

3. "Warning at:"

4. Turn the controller until the desired speed is displayed.

5. Press the controller.

Speed warning is stored.

Activating/deactivating the speed warning

On the Control Display:

1. "Settings"

2. "Speed"

3. "Warning"

4. Press the controller.

Setting your current speed as the speed warning

On the Control Display:

1. "Settings"

2. "Speed"

3. "Select current speed"

4. Press the controller.

The current vehicle speed is stored as the speed warning.

    Trip computer
    The vehicle features two types of board computers. "Onboard info": the values can be reset as often as necessary. "Trip compute ...

    Settings on the Control Display
    ...

    Other materials:

    BMW X3 Service & Repair Manual > Clutch pedal with linkage: Removing and installing/replacing over-center helper spring
    Necessary preliminary work: Remove pedal trim . Press end of pin (1) together with offset pliers and press out pin. Push in pin (1) fully in direction of arrow. Detach retainers (1). Installation note: Check retainers, replace if necessary. Retainers must lie with both legs i ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0084