BMW X3 Owners Manual: Switching on/off

Switching on automatically The system is automatically active after every driving-off.

Switching on/off manually

Press button briefly:

  • The menu for the intelligent safety system is displayed. The systems are individually switched off according to their respective settings.
  • LED lights up orange or goes out respective to their individual settings.

Adjust as needed. Individual settings are stored for the profile currently in use.

Press button again:

  • All Intelligent Safety systems are activated.
  • The LED lights up green.

Hold down button:

  • All Intelligent Safety systems are turned off.
  • The LED goes out.

Setting the warning time The warning time can be set via iDrive.

1. "Settings"

2. "Frontal Coll. Warning"

3. Activate the desired time on the Control Display.

The selected time is stored for the profile currently in use.

    At a glance
    Button in the vehicle Intelligent Safety button Camera The camera is found near the interior rearview mirror. Keep the windshield in the ...

    Warning with braking function
    Display If a collision with a recognized vehicle is imminent a warning symbol appears in the instrument cluster and in the Head-Up Display. The v ...

    Other materials:

    BMW X3 Service & Repair Manual > Electronic switching or control units: Removing/replacing knock sensor (3rd and 4th cylinder) (N20, N26)
    Necessary preliminary tasks: Read out the fault memory of the DME control unit. Switch off ignition. Remove STARTER MOTOR. Unlock connector (1) and remove. Release bolt (2) on knock sensor. Remove knock sensor for 3rd and 4th cylinders. Installation note: Clean contact surface of ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2019 Copyright www.bmwx3tech.com - 0.0058