BMW X3 Owners Manual: Warning with braking function

Display If a collision with a person detected in this way is imminent, a warning symbol appears on the instrument cluster and in the Head-up Display.

The red symbol is displayed and a signal sounds.

Intervene immediately by braking or make an evasive maneuver.

Braking intervention The warning prompts the driver himself/herself to react. During a warning, the maximum braking force is used. Premise for the brake booster is sufficiently quick and hard stepping on the brake pedal. The system can assist with some braking intervention if there is risk of a collision. At low speeds vehicles may thus come to a complete stop.

The braking intervention is executed only if DSC Dynamic Stability Control is switched on and Dynamic Traction Control DTC is activated.

The braking intervention can be interrupted by stepping on the accelerator pedal or by actively moving the steering wheel.

Object detection can be restricted. Limitations of the detection range and functional restrictions are to be considered.

    Switching on/off
    Switching on automatically The system is automatically active after every driving-off. Switching on/off manually Press button briefly: The ...

    System limits
    Detection range The detection potential of the camera is limited. Thus a warning might not be issued or be issued late. E. g. the following si ...

    Other materials:

    BMW X3 Service & Repair Manual > Electronic switching or control units: Replacing suction pressure sensor on intake plenum (N20, N26)
    Necessary preliminary tasks: Read out the fault memory of the DME control unit. Switch off ignition. Partially undo the acoustic cover. Unlock connector (1) and remove. Unfasten screws (2). Pull out the vacuum pressure sensor (3) from the intake plenum. Installation note: Check ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0077