BMW X3 Owners Manual: Switching on/off
Switching on automatically The lane departure warning is automatically activated after departure, if the function was switched on the last time the engine was stopped.
Switching on/off manually
Press button briefly:
- The menu for the intelligent safety system is displayed. The systems are individually switched off according to their respective settings.
- LED lights up orange or goes out respective to their individual settings.
Adjust as needed. Individual settings are stored for the profile currently in use.
Press button again:
- All Intelligent Safety systems are activated.
- The LED lights up green.
Hold down button:
- All Intelligent Safety systems are turned off.
- The LED goes out.
Display in the instrument cluster
- Lines: system is activated.
- Arrows: at least one lane marking was detected and warnings can be issued.
Issued warning
If you leave the lane and if a lane marking has been detected, the steering wheel begins vibrating.
If the turn signal is set before changing the lane, a warning is not issued.
End of warning
The warning ends:
- Automatically after approx. 3 seconds.
- When returning to your own lane.
- When braking hard.
- When using the turn signal.
At a glance
Button in the vehicle
Intelligent Safety button
Camera
The camera is found near the interior rearview
mirror.
Keep the windshield in the ...
System limits
The system may not be fully functional in the
following situations:
In heavy fog, rain or snowfall.
In the event of missing, worn, poorly visib ...
Other materials:
BMW X3 Service & Repair Manual > Rear axle repair instructions: Replacing shaft seal(s) for output shaft(s) in rear axle final drive
Special tools required:
00 5 010
32 1 060
33 1 308
33 5 130
33 5 140
Necessary preliminary work:
Remove REAR AXLE FINAL DRIVE.
Use special tools 00 5 010 and 32 1 060 /33 1 308 to remove radial shaft seal
Installing new shaft seal:
NOTE:
The installation protective ri ...