BMW X3 Owners Manual: Switching on/off

Switching on/off manually

  Press button.

Depending on the transmission position, the picture of the front or rear camera is displayed.

Switching off automatically By switching into a different function or when changing gears.

Front Side View: when a certain driving distance or speed is exceeded.

Display

General information The traffic area in front of or behind the vehicle is displayed on the Control Display.

Brightness With the Side View switched on:

1. Select the symbol.

2. Turn the controller until the desired setting is reached, and press the controller.

Contrast With the Side View switched on:

1. Select the symbol.

2. Turn the controller until the desired setting is reached, and press the controller.

    At a glance
    Button in the vehicle   Side View Cameras Front camera Rear camera Two cameras are used for the detection. The image quality ma ...

    Warning of crossing traffic
    The concept When an object approaching from the side is detected by the front or rear camera, this is depicted by a symbol in the Side View display ...

    Other materials:

    BMW X3 Service & Repair Manual > Electronic switching or control units: Replacing pulse sensor on exhaust camshaft (N52T)
    IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) . Necessary preliminary work: Read out the fault memory of the DME control unit. Switch off ignition. Remove ACOUSTIC COVER Release screw (1). Release holder (2) from cylinder h ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0077