BMW X3 Owners Manual: Detailed measurement
The concept In the detailed measurement the engine oil level is checked and displayed via a scale.
Gasoline engine: If the engine oil level reaches the minimum level, a check control message is displayed.
Diesel engine: If the engine oil level reaches the minimum level or an overfilling is detected, a check control message is displayed.
During the measurement, the idle speed is increased somewhat.
General information A detailed measurement is only possible with certain engines.
Requirements
- Vehicle is on level road.
- Steptronic transmission: selector lever in selector lever position N or P and accelerator pedal not depressed.
- Engine is running and is at operating temperature.
Performing a detailed measurement In order to perform a detailed measurement of the engine oil level:
1. "Vehicle info"
2. "Vehicle status"
3.
"Measure engine oil level"
4. "Start measurement"
The engine oil level is checked and displayed via a scale.
Time: approx. 1 minute.
Status display
The concept
The engine oil level is monitored electronically
while driving and shown on the Control Display.
If the engine oil level reaches the m ...
Adding engine oil
General information
Switch off the ignition and safely park the vehicle
before engine oil is added.
Oil filler neck
Only add engine oil when t ...
Other materials:
BMW X3 Service & Repair Manual > Electrical components: Replacing left or right wheel speed accelerator sensor
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC
DISCHARGE (ESD PROTECTION) .
Disconnect plug connection (1) from acceleration sensor on the spring strut.
Release screw (1) and remove sensor.
Installation note:
Check installation position.
Fit wheel spe ...