BMW X3 Owners Manual: Vehicle features and options

BMW X3 Owners Manual / Mobility / Coolant / Vehicle features and options

This chapter describes all standard, country-specific and optional features offered with the series. It also describes features that are not necessarily available in your car, e. g., due to the selected options or country versions. This also applies to safety-related functions and systems. The respectively applicable country provisions must be observed when using the respective features and systems.

Hints

Danger of burns from hot engine

Do not open the cooling system while the engine is hot; otherwise, esliding coolant may cause burns.

Suitable additives

Only use suitable additives; otherwise, engine damage may occur. The additives are harmful to your health.

Coolant consists of water and additives.

Not all commercially available additives are suitable for the vehicle. Information about the suitable additives are available from the service center.

    Coolant
    ...

    Coolant level
    General information Depending on the engine installation, the coolant reservoir is located on the right side or the left side of the engine compart ...

    Other materials:

    BMW X3 Service & Repair Manual > Front axle repair instructions: Safety information for working on vehicles with automatic engine start-stop function (msa)
    WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start-stop function is active. An automatic engine start is possible. Observe safety precautions when working on MSA vehicles. Before carr ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0084