BMW X3 Owners Manual: General information

If the battery is discharged, the engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles.

Hints

Do not touch live parts

To avoid the risk of potentially fatal injury, always avoid all contact with electrical components while the engine is running.

To prevent personal injury or damage to both vehicles, adhere strictly to the following procedure.

    Jump-starting
    ...

    Preparation
    Bodywork contact between vehicles Make sure that there is no contact between the bodywork of the two vehicles; otherwise, there is a danger of shor ...

    Other materials:

    BMW X3 Service & Repair Manual > Electronic components: Removing and installing/replacing emf actuator
    Necessary preliminary tasks: Release parking brake. Switch off ignition. IMPORTANT: Switch off ignition at least 30 s before disconnecting the plug connection! After installation, observe the following: switch on ignition and, using parking brake operating element, open parking ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0082