BMW X3 Service & Repair Manual: Notes on handling the high pressure cleaner

BMW X3 Service & Repair Manual / Body and Frame / Body repair instructions / Notes on handling the high pressure cleaner

WARNING: Only used a high pressure cleaner approved by BMW! Only instructed persons aged over 16 years may work using a high pressure cleaner.

Check the high pressure cleaner and electrical wiring for visible damage.

Only use at a suitable location.

IMPORTANT:

Pay attention to following hazard warnings:

  • Danger of injury due to water jet
  • Contact with hazardous substances in spray
  • Risk of skidding on wet floor
  • Risk of stumbling due to hoses and cables
  • Comply WITH NOTES AND INSTRUCTIONS ON HANDLING CLEANING AGENTS !
  • Risk of scalding when cleaning with hot water.
  • On electric or hybrid cars, the safety instructions for handling with hybrid cars are to be complied with.

WARNING: The following personal protective equipment is to be used:

  • Safety goggles/face guard
  • Suitable gloves
  • Apron
  • Rubber boots
  • Ear protectors
  • Safety shoes

IMPORTANT:

Notes on washing a vehicle with a high pressure cleaner:

  • Do not wash directly on gaskets and control units during engine washes.
  • A minimum distance of 30 cm must be adhered to for tires and tire valves.
  • A minimum distance of 30 cm must be adhered to for the soft top and painted parts.
  • Do not use if engine is still hot.
  • Do not exceed maximum water temperature of 60 degrees.
  • Do not spray directly onto cameras/sensors.
  • On electric or hybrid cars do not wash on high-voltage components.
    Notes on adhesive K6
    IMPORTANT: Note the following information before starting to apply adhesive! Country-specific safety and industrial safety regulations M ...

    Notes on repairing threads
    IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread! NOTE: Damaged threads may be repaired with Helicoil t ...

    Other materials:

    BMW X3 Service & Repair Manual > Struts with rubber mounts: Replacing rubber mount in left or right trailing link
    Special tools required: 31 2 261 31 2 264 IMPORTANT: The rubber mounts are only permitted to be replaced once. Carry out check: There must always be a minimum amount of play in the guide joint. 1. Check guide joint play NOTE: Apply light pressure to the trailing link (in the area ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0042