BMW X3 Service & Repair Manual: Removing and installing door

IMPORTANT: Do not damage adjoining body components.

The graphics are schematic representations and are to be applied to the relevant vehicle type.

Release screw on connector frame.

Body+and+Frame

NOTE: Secure door against closing.

Release screw (1) on door stop.

Open door up to limit position.

Body+and+Frame

Release screws between both hinge elements at top and bottom.

Body+and+Frame

Pull plug connection from door post, unlock by pulling out bar and detach.

Unhinge door by moving upwards and placing it on a suitable surface.

Installation: If necessary, adjust DOOR.

Body+and+Frame

    Adjust door
    IMPORTANT: Do not damage adjoining body components. Minor corrections (realignment work) are permitted if the existing adjustment options are ...

    Rear side doors
    ...

    Other materials:

    BMW X3 Service & Repair Manual > Rear axle repair instructions: Measuring vehicle ride height
    Determine actual ride height (A) - to do so, attach tape measure to rim flange (2) at bottom middle and measure to wheel arch lower edge (1). NOTES ON REPAIRING THREADS IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread! NOTE: Damaged threads may ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2021 Copyright www.bmwx3tech.com - 0.0053