BMW X3 Service & Repair Manual: Removing and installing engine compartment lid

BMW X3 Service & Repair Manual / Body and Frame / Front lid / Removing and installing engine compartment lid

Necessary preliminary tasks:

  • Remove RIGHT MICROFILTER HOUSING COVER .

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Body+and+Frame

IMPORTANT: Support the engine compartment lid. Removal of the engine compartment lid must be carried out with the assistance of a second person.

Unscrew nuts (1).

Remove engine compartment lid.

Installation note: Install engine compartment lid at screw locations to on hinge.

If necessary, adjust ENGINE COMPARTMENT LID.

Body+and+Frame

    Adjusting engine compartment lid
    IMPORTANT: Do not damage adjoining body components! Minor corrections (realignment work) are permitted if the existing adjustment options ...

    Removing and installing/replacing hinge for engine compartment Lid
    WARNING: Support engine compartment lid in fully opened position with suitable apparatus. Risk of injury. Necessary preliminary tasks: Rem ...

    Other materials:

    BMW X3 Owners Manual > Tire Pressure Monitor TPM: Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. There is a flat tire or a major loss in tire inflation pressure. No reset was performed for the system. The system therefore issues a warning based on the tire inflation pressures before the last reset. 1 ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0082