Insert Mechanical tool
NOTE: Protective insert As of 08/2011, replaces the previous special tool number 31 3 365
SI number
01 16 11 (738)
Insert Mechanical tool
NOTE: Protective insert As of 08/2011, replaces the previous special tool number 31 3 368
SI number
01 16 11 (738)
Insert AM
Replaced by: 83300493560
NOTE: (Protective insert) For spring retainer 31 3 122 Discontinuation and replaced by 31 3 350. (0 493 560)
Insert AM
Replaced by: 83300493560
NOTE: (Protective insert) For spring retainer 31 3 123 and 31 3 129 Discontinuation and replaced by 31 3 350. (0 493 560)
Insert AM
NOTE: (Protective insert) For spring retainer 31 3 325
Insert Mechanical tool
NOTE: Protective insert As of 08/2011, replaces the previous special tool number 31 3 364. Protective insert suitable for clamping plate 31 3 382 = 83 30 2 213 039.
SI number
01 16 11 (738)
Insert AM
In conjunction with: 31 3 352 = 83300493566
NOTE: Protective insert for clamping plate As of 08/2011, replaces the previous special tool number 31 3 362. Protective insert suitable for clamping plate 31 3 352 = 83 30 2 213 026.
SI number
01 16 11 (738)
Insert Mechanical tool
NOTE: Protective insert (blue) As of 08/2011, replaces the previous special tool number 31 3 369. Protective insert suitable for clamping plate 31 3 352 = 83 30 2 213 026.
SI number
01 16 11 (738)
Insert AM
NOTE: Protective insert As of 08/2011, replaces the previous special tool number 31 3 365. Protective insert suitable for clamping plate 31 3 355 = 83 30 2 213 034.
SI number
01 16 11 (738)
Insert Mechanical tool
NOTE: Protective insert (ring) As of 08/2011, replaces the previous special tool number 31 3 356. Protective insert suitable for clamping plate 31 3 354 = 83 30 2 213 031.
SI number
01 16 11 (738)
Insert AM
NOTE: (Protective insert) For spring retainer 31 3 322
Insert AM
NOTE: (Protective insert) For spring retainer 31 3 323
Insert AM
Replaced by: 83300493560
NOTE: (Protective insert) For spring retainer 31 3 125 Discontinuation and replaced by 31 3 350. (0 493 560)
Insert Mechanical tool
NOTE: Protective insert As of 08/2011, replaces the previous special tool number 31 3 363. Protective insert suitable for clamping plate 31 3 353 = 83 30 2 213 029.
SI number
01 16 11 (738)
Insert AM
NOTE: (Protective insert) For spring retainer 31 3 329
BMW X3 Owners Manual > Coolant: Coolant level
General information
Depending on the engine installation, the coolant
reservoir is located on the right side or the
left side of the engine compartment.
Checking
1. Let the engine cool.
2. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess
pressure to dissi ...