BMW X3 Service & Repair Manual: Device

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Washer

NOTE: (Measuring disc)

Driveline+Axles

Device AM

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Washer

NOTE: (Measuring disc)

Driveline+Axles

Device AM

NOTE: (Pulling device) For pulling out the rubber mount in the final drive

Storage Location

A14

B14

Consisting of:

1. Spindle

NOTE: (Threaded spindle, long) Series: E36/5 sale of existing inventory and then available as part of set of special tools 33 2 120 = 83 30 0 492 179 only - as of 09.12.2011

2. Nut

NOTE: Liquidation of existing inventory and then available only as a complete tool set 33 2 120 = 83 30 0 492 179 - as of 09.12.2011

Driveline+Axles

3. Synchronising key
4. Holder

NOTE: (Countersupport) 0496208 =119850

Device AM

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Washer

NOTE: (Measuring disc)

Driveline+Axles

Device AM

NOTE: For removing and installing the rubber mount in the 20º trailing arm

Storage Location

B10

C10

Consisting of:

1. Nut

NOTE: (Nut with bearing) Model series: E28, E30, E83

Driveline+Axles

2. Spindle

NOTE: Series: E28, E30, E83

3. Holding sleeve

NOTE: Series: E28, E30 discontinued, available as part of set of special tools only

4. Synchronising key

5. Synchronising key

NOTE: (Synchronising key) Model series: E28, E30 Model: 518 - 735i discontinued, available as part of set of special tools only

6. Synchronising key

NOTE: Series: E28, E30 Model: 316 - 323i discontinued, available as part of set of special tools only

Device AM

NOTE: For removing and installing the ball joint in the wishbone

SI number

01 01 89 (989)

Consisting of:

1. Shaped element

NOTE: For positioning when pressing out the ball joint

2. Bush

NOTE: (Pressure bushing) For pressing the ball joint out of the wishbone

3. Shaped element

NOTE: For positioning the wishbone when pressing in the ball joint

4. Bush

NOTE: (Pressure bushing) For pressing the ball joint into the wishbone

Driveline+Axles

Device Mechanical tool

NOTE: (mounting fixture) For rear axle final drive with modified bore hole - Model: from 83

Driveline+Axles

Device Mechanical tool

NOTE: (Device) For function check of the mechanical limited slip differential

Driveline+Axles

Device AM

NOTE: For determining the side clearance of the differential side gears

Storage Location

Y4

Consisting of:

1. Washer

NOTE: (Washer with thread)

2. Washer

NOTE: (Washer without thread)

Driveline+Axles

Device AM

NOTE: For removing and installing the rubber mount in the trailing arm

SI number

01 01 89 (989)

Consisting of:

1. Holding sleeve

NOTE: (support sleeve) During extraction

2. Holding sleeve

NOTE: (Press-out sleeve)

3. Holding sleeve

NOTE: (Press-in sleeve)

4. Shaped element

NOTE: For pressing in

Driveline+Axles

Device AM

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Washer

NOTE: (Measuring disc)

Driveline+Axles

Device AM

NOTE: For removing and installing ball joint in wheel carrier.

Storage Location

C53

SI number

01 18 05 (214)

Consisting of:

1. Synchronising key

NOTE: (Thrust piece (for removing)) Deletion, only available via tool set

Driveline+Axles

2. Bush

NOTE: (Bush (for removal and installation)) Deletion, only available via tool set

3. Synchronising key

NOTE: (Thrust piece (for installing)) Deletion, only available via tool set

Device AM

NOTE: For determining the side clearance of the differential side gears in the differential housing

Storage Location

Z3

Z4

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Adapter

NOTE: (adapter with nut and washer)

3. Extension

NOTE: (extension (2 x))

Driveline+Axles

Device AM

NOTE: For determining the side clearance of the differential side gears

Storage Location

Y3

Consisting of:

1. Screw
2. Washer

Driveline+Axles

Device AM

NOTE: For removing and installing the rubber mount in the wishbone

SI number

01 01 89 (989)

Consisting of:

1. Holding sleeve

NOTE: (Support sleeve) For pressing out

2. Holding sleeve

NOTE: (Press-out sleeve)

3. Holding sleeve

NOTE: (Press-in sleeve)

4. Shaped element

NOTE: For pressing in

Driveline+Axles

Device Mechanical tool

NOTE: For determining the installation dimension of the drive bevel gear in the rear axle differential (also E36/3 and E36/7)

Driveline+Axles

Device AM

NOTE: (Holding device) For fixing the final drive on the assembly stand

SI number

01 05 95 (932)

Consisting of:

1. Frame

NOTE: (Main frame)

2. Screw

NOTE: (Knurled screws (M16 2 x))

Driveline+Axles

Device Mechanical tool

Replaced by: 83300494611

NOTE: For removing the rear axle final drive/Replaced by 33 4 420. (0 494 611)

SI number

01 10 90 (288)

Driveline+Axles

Device AM

NOTE: For determining the installation size of the bevel drive pinion in the rear axle final drive

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Washer

NOTE: (Measuring disc)

Driveline+Axles

Device AM

NOTE: For removing inner wheel bearing races on rear axle

SI number

08 12 14 (155)

Consisting of:

1. Basic body

NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400.

Driveline+Axles

2. Spindle

NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400.

3. Wrench

NOTE: (Ignition key) Discontinued, only available via complete tool

4. Wrench

NOTE: (Ignition key) Discontinued, only available via complete tool

5. Pliers

NOTE: (Clamping ring (45 to 51 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400.

6. Pliers

NOTE: (Clamping ring (50 to 55 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400.

7. Pliers

NOTE: (clamping ring (55...61 mm)) Model series: E67 No longer available separately, only via complete tool set 0493416 = 33 4 400.

8. Ring

NOTE: (Clamping ring) Model series: F01, F02. Available only as complete special tool set 33 4 400.

9. Synchronising key

NOTE: Series: F01, F02. Remaining inventories will be sold off and then it will no longer be available separately, only available as part of complete tool set 0493416 = 33 4 400.

Device Minimum set: Mechanical tools AM

NOTE: For removing rubber mount in rear axle support.

Storage Location

A8

B8

SI number

01 02 99 (417)

Consisting of:

1. Pipe

NOTE: (Threaded tube) Deletion, only available via tool set

Driveline+Axles

2. Shaped part

NOTE: (Shaped part) 2 pieces Model series: E38, E39, E46 Deletion, only available via tool set

3. Shaped part

NOTE: (Shaped part)

4. Rod

NOTE: (Guide rod)

5. Rod

NOTE: (Guide rod) With thread dog point

6. Plate

NOTE: (Fixing plate) With screws Deletion, only available via tool set

7. Synchronising key

NOTE: (Synchronising key (2 x)) With screws - model series: E38, E39, E46 Deletion, only available via tool set

8. Shaped part

NOTE: (Shaped part) 2 pieces Model series: E39/2, E65, E67, RR1

9. Synchronising key

NOTE: (Synchronising key (2 x)) With countersunk screw - model series: E39/2, E65, E67, E87

Device Minimum set: Mechanical tools AM

NOTE: For removing and installing rubber mount in rear axle final drive at front.

Storage Location

A22

SI number

01 22 06 (307)

Consisting of:

1. Washer

NOTE: Discontinued, can only be ordered using complete tool

Driveline+Axles

2. Holding sleeve

NOTE: Discontinued, can only be ordered using complete tool

3. Washer

NOTE: Discontinued, can only be ordered using complete tool

4. Holding sleeve

NOTE: Discontinued, can only be ordered using complete tool

5. Washer

NOTE: Discontinued, can only be ordered using complete tool

6. Nut

NOTE: (Nut M12x1.5) discontinued, can only be ordered using complete tool

Device AM

NOTE: For removing and installing the rubber mount in the support tube of the rear axle final drive mounting

SI number

01 01 89 (989)

Consisting of:

1. Plate

NOTE: (Shaped plate, top) For removing

2. Plate

NOTE: (Shaped plate, top) For pulling in

3. Plate

NOTE: (Shaped plate, bottom) For pulling in

Driveline+Axles

Device Mechanical tool

Replaced by: 83300492079

NOTE: (Fixture) For all rear axle final drives - model year: From 88 - Replaced by 33 1 070. (0 492 079)

Driveline+Axles

Device AM

NOTE: For pulling off drive flanges (also E46/16).

Storage Location

C17

C18

Consisting of:

3 = Washer
4 = Plate

NOTE: (adapter plate) Transmission: GS6-57DZ, GS6-53BZ (G transmission) GS6- 51DZ, GS6-51BZ (H transmission) Deletion, only available via tool set

Driveline+Axles

5 = Screw

NOTE: (countersunk screws M10x30 (3 x)) Transmission: GS6-57DZ, GS6-53BZ (G transmission) GS6-51DZ, GS6-51BZ (H transmission) Deletion, only available via tool set

1 = Spindle

NOTE: Discontinued, can only be ordered using complete tool

2 = Mandrel

NOTE: Discontinued, can only be ordered using complete tool

Device AM

NOTE: Device A1 in connection with adapter kit 1 (BMW), (81 64 2 155 745), for removal and installation of wheel bearings, propeller shafts and drive flanges.

SI number

08 06 09 (544)

Driveline+Axles

Device AM

NOTE: For removing and installing outer rings of taper roller bearings

Consisting of:

1 = Shaped part

NOTE: (Shaped part)

2 = Spindle

NOTE: (Spindle, short)

4 = Nut

Driveline+Axles

5 = Washer

NOTE: (Installation washer (2 pieces))

6 = Bridge

NOTE: (Support bridge)

7 = Washer

NOTE: (Thrust washer)

8 = Holding sleeve

NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.

Device Minimum set: Mechanical tools AM

NOTE: For removing and installing output shaft in rear axle final drive.

Storage Location

A22

B22

C22

SI number

01 01 07 (333)

Consisting of:

Driveline+Axles

1 = Basic body

NOTE: Only available via complete tool set 33 5 120 - > (83 30 0 495 851).

2 = Screw

NOTE: (Knurled screw with thrust piece) available as part of set of special tools 33 5 120 -> (83 30 0 495 851) only.

3 = Rod

NOTE: Only available via complete tool set 33 5 120 - > (83 30 0 495 851).

4 = Shaped element

NOTE: (Shaped element) shaped element (bearing shell) available as part of set of special tools 33 5 120 -> (83 30 0 495 851) only.

5 = Shaped element

NOTE: Sale of existing inventory then available as part of set of tools 33 5 120 -> (83 30 0 495 851) only.

7 = Shaped part

NOTE: For driving output shaft into rear axle final drive.

6 = Shaped part

NOTE: For pressing output shaft out of rear axle final drive.

    Case
    Case AM NOTE: (Case) with label. Case Minimum set: Mechanical tools AM NOTE: (Case) Case with insert discontinued, can only be ordered using co ...

    Extension
    Extension Minimum set: Mechanical tools AM NOTE: (Extension (1 item)) discontinued, can only be ordered using complete tool SI number 01 21 06 (3 ...

    Other materials:

    BMW X3 Service & Repair Manual > Transmission: General information on automatic transmission fluids
    1.0 GENERAL INFORMATION ON AUTOMATIC TRANSMISSION FLUIDS Automatic Transmission Fluid was developed especially for automatic transmissions. It requires additives which are carefully matched with each other, a high viscosity index and a solidification point below -40 ºF/-40ºC. Friction ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2021 Copyright www.bmwx3tech.com - 0.0083