BMW X3 Service & Repair Manual: Replacing positive battery cable between starter motor, alternator and positive battery connection point (N55)

BMW X3 Service & Repair Manual / Electrical / Starter lead / Replacing positive battery cable between starter motor, alternator and positive battery connection point (N55)

Necessary preliminary work:

  • Read out the fault memory of the DME control unit.
  • Switch off ignition.
  • Disconnect BATTERY EARTH LEAD .
  • REMOVE intake plenum.

Fold back cover (1).

Release nut underneath. Remove positive battery cable from battery positive terminal.

Electrical

Remove protective cap (2) and release nut underneath.

Disconnect positive battery cable from alternator.

Electrical

Unclip positive battery cable (1) from holder (2).

Electrical

Release nut (2) on starter motor only.

Remove positive battery cable from starter motor and pull out.

Electrical

NOTE: Reassemble the vehicle.

Check stored fault messages.

Delete fault memory.

    Replacing positive battery cable between starter motor, alternator and positive battery connection point (N47 D20 O1)
    Necessary preliminary work: Read out the fault memory of the DME control unit. Switch off ignition. Disconnect BATTERY EARTH LEAD . Remove I ...

    Replacing positive battery cable between starter motor, alternator and positive battery connection point (N20)
    Necessary preliminary tasks: Switch off ignition. Disconnect BATTERY NEGATIVE LEAD . Remove INTAKE PLENUM . REMOVE COVER FOR WINDSCREEN COWL ...

    Other materials:

    BMW X3 Owners Manual > Changing wheels and tires: Winter tires
    Winter tires are recommended for operating on winter roads. Although so-called all-season M+S tires provide better winter traction than summer tires, they do not provide the same level of performance as winter tires. Maximum speed of winter tires If the maximum speed of the vehicle is highe ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0076