BMW X3 Service & Repair Manual: Replacing actuator drive for rear compartment flap

BMW X3 Service & Repair Manual / HVAC / Heater with operation / Replacing actuator drive for rear compartment flap

Necessary preliminary tasks:

Remove RIGHT GLOVE BOX WITH HOUSING

Release screws (1).

Detach actuator drive for rear compartment flap (2) from heating/air conditioning unit.

Unlock associated plug connection and disconnect.

HVAC

IMPORTANT: Servomotors must be readdressed in the event of replacement! Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body

Heating and air conditioning function

Flap motors

Readdress flap motors

Removing and installing/replacing ventilation temperature sensor

Necessary preliminary work: Remove DECORATIVE STRIP ON DASHBOARD IN MIDDLE Pull temperature sensor (1) out of retaining lug (2). Installation ...

Replacing actuator drive of ventilation flaps

Necessary preliminary work: Remove SUPPORT FOR DASHBOARD Release screws (1). Release plug connection (3) and disconnect. Detach servodriv ...

Other materials:

BMW X3 Owners Manual > Universal Integrated Remote Control: Reprogramming individual buttons
1. Switch on the ignition. 2. Press and hold the interior rearview mirror button to be programmed. 3. As soon as the interior rearview mirror LED starts flashing slowly, hold the hand-held transmitter for the system to be controlled approx. 1 to 3 in/2.5 to 8 cm away from the buttons of t ...