BMW X3 Service & Repair Manual: Replacing servodrive for blending flap

BMW X3 Service & Repair Manual / HVAC / Heater with operation / Replacing servodrive for blending flap

Necessary preliminary work:

  • Remove SUPPORT FOR DASHBOARD

Release screws (1).

Detach actuator drive for stratification flap (2) from heating/air conditioning unit (4).

Unlock plug connection (3) and disconnect.

HVAC

Servomotors must be readdressed in the event of replacement! Addressing can only be carried out with the BMW diagnosis system.

Service functions:

  • Body
  • Heating and air conditioning function
  • Flap motors
  • Readdress flap motors
    Replacing heat exchanger
    Necessary preliminary work: Remove HEATER IMPORTANT: Before ordering spare parts, determine manufacturer of the installed heater! Inst ...

    Replacing servodrive for footwell flap (automatic a/c)
    Necessary preliminary work: Remove RIGHT GLOVE BOX WITH HOUSING Release screws (1). Detach actuator drive for footwell flap (2). Release ...

    Other materials:

    BMW X3 Service & Repair Manual > Approved hydraulic fluids: E24, e28, e32, e34, and e38
    E24, E28 produced prior to 9/87 Pentosin CHF 4548 was used for initial factory filling. For filling up and replacement the following oil is to be used: Pentosin CHF 7.1 BMW Part No. 81 22 1 468 879 Pentosin CHF 4548 and CHF 7.1 can be mixed in these cars. For complete system oil replacement: ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0078