BMW X3 (F25) Service & Repair Manual: Engine mounting

BMW X3 (F25) Service & Repair Manual / Transmission / Engine mounting

Replacing left engine mount (N20)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N47)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N52)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N55)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove rear UNDERBODY PROTECTION ASSEMBLY
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove GUIDE TUBE of dip stick.
  • Remove rear underbody protection.
  • Partially detaching the front left wheel arch panel.

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove THROTTLE BODY
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing left engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove left CHARGE AIR DUCT
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing right engine mount (N20)

Necessary preliminary tasks:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N47)

Necessary preliminary tasks:

  • REMOVE right engine support arm.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N52)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N55)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove the REAR UNDERBODY PROTECTION
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove REINFORCEMENT PLATE .

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Tire mounting paste
1.0 TIRE MOUNTING PASTE Use only a lubricant specifically designed for this purpose (former BMW Part No. 81 22 9 407 288). Wurth Tire Mounting Pas ...

Transmission suspension, automatic. transmission
...

Other materials:

BMW X3 (F25) Service & Repair Manual > DTC: Tire pressure monitor system reminder
NOTE: If a tire pressure has been adjusted, or a wheel or tire has been changed or replaced, or repairs have been made to air spring suspension, the TPM system must be reinitialized. System must be reinitialized both before and after pulling a trailer. CAUTION: When driving with snow chains or ...