BMW X3 (F25) Service & Repair Manual: Transmission suspension, automatic. transmission
- Replacing cross member for transmission mounting
- Replacing rubber mount for transmission mounting
- Replacing rubber mount for transmission mounting (atc 450)
- Replacing rubber mount for transmission mounting (atc 45l)
Replacing cross member for transmission mounting
Special tools required:
- 00 2 030
- 23 4 050
Necessary preliminary tasks:
- Remove REAR UNDERBODY PROTECTION .
- Remove LEFT UNDERBODY PANELLING .
Supporting transmission:
Support transmission with special tools 23 4 050 , 00 2 030 .
Secure transmission to mounting with tensioning strap (1).
Tasks are described in GEARBOX HOLDER .
Unfasten ground strap (1).
Release screws.
Remove cross member.
Replacing rubber mount for transmission mounting
Special tools required:
- 22 1 051
- 22 1 052
- 33 4 465
- 33 4 466
- 22 1 046
- 22 1 053
Necessary preliminary tasks:
- Remove CROSS MEMBER for transmission mounting.
Attach special tool 22 1 051 with screw (1) on the housing.
Pull out rubber mount with special tools 22 1 052 /33 4 465 and 33 4 466 .
Installation note:
Observe installation position of rubber mount.
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight.
Insert special tool 22 1 046 with bolt into recesses of rubber mount.
Draw in rubber mount with special tools 22 1 046 /22 1 053 /33 4 465 and 33 4 466 .
Replacing rubber mount for transmission mounting (atc 450)
Special tools required:
- 22 1 051
- 22 1 052
- 33 4 465
- 33 4 466
- 22 1 046
- 22 1 053
Necessary preliminary work:
- Remove CROSS MEMBER for transmission mounting
Attach special tool 22 1 051 with screw (1) on the housing.
Pull out rubber mount with special tools 22 1 052 /33 4 465 and 33 4 466 .
Installation note:
Observe installation position of rubber mount.
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight.
Insert special tool 22 1 046 with bolt into recesses of rubber mount.
Draw in rubber mount with special tools 22 1 046 /22 1 053 /33 4 465 and 33 4 466 .
Replacing rubber mount for transmission mounting (atc 45l)
Special tools required:
- 22 1 051
- 22 1 052
- 33 4 465
- 33 4 466
- 22 1 046
- 22 1 053
Necessary preliminary tasks:
- Remove CROSS MEMBER for transmission mounting
Attach special tool 22 1 051 with screw (1) on the housing.
Pull out rubber mount with special tools 22 1 052 /33 4 465 and 33 4 466 .
Installation note:
Observe installation position of rubber mount.
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight.
Insert special tool 22 1 046 with bolt into recesses of rubber mount.
Draw in rubber mount with special tools 22 1 046 /22 1 053 /33 4 465 and 33 4 466 .
Engine mounting
...
Other materials:
BMW X3 (F25) Service & Repair Manual > Brakes: Accelerator pedal actuation
REMOVING AND INSTALLING OR REPLACING ACCELERATOR PEDAL MODULE
Take off cap.
Release screw.
Pull accelerator pedal module upwards out of fixture.
Pull off connector (1).
Remove accelerator pedal module.
IMPORTANT:
Accelerator pedal module can only be replaced completely with ...
