BMW X3 Owners Manual: Avoiding unintentional alarms

BMW X3 Owners Manual / Controls / Opening and closing / Alarm system / Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations:

  • In automatic car washes.
  • In duplex garages.
  • During transport on trains carrying vehicles, at sea or on a trailer.
  • With animals in the vehicle.

Switching off the tilt alarm sensor and interior motion sensor

Press the remote control button again within 10 seconds as soon as the vehicle is locked.

The indicator lamp lights up for approx. 2 seconds and then continues to flash.

The tilt alarm sensor and interior motion sensor are turned off, until the vehicle is locked again.

Switching off the alarm

  • Unlock vehicle with the remote control or switch on the ignition, if needed through emergency detection of remote control
  • With Comfort Access: if you are carrying the remote control on your person, grasp the driver side or front passenger side door handle completely.
    Indicator lamp on the interior rearview mirror
    The indicator lamp flashes briefly every 2 seconds: The system is armed. The indicator lamp flashes after locking: The doors, hood or t ...

    Power windows
    ...

    Other materials:

    BMW X3 Service & Repair Manual > Body repair instructions: Notes on adhesive K1
    IMPORTANT: Note the following information before starting to apply adhesive! Country-specific safety and industrial safety regulations Material safety data sheet of manufacturer Processing instructions on glue cartridge Storage: Dry at 15º- 25 ºC. Shelf life: The glue ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0083