BMW X3 Service & Repair Manual: Disconnecting a water hose

Special tools required:

  • 13 3 010

When removing water hoses which are located in the upper area of the cooling system, disconnecting them prevents a large-scale escape of coolant.

Place special tool 13 3 010 on the coolant hose (1) as depicted.

Disconnect water hose (1) by turning nut (2) in direction of arrow.

HVAC

    Information on using cleaning agent/paints (personal protection equipment)
    WARNING: Use of cleaning agents/paints not compliant with instructions can cause serious injuries or burns! Handling cleaning agents/paints can tr ...

    Safety information for working on vehicles with automatic engine start-stop function (msa)
    WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start ...

    Other materials:

    BMW X3 Service & Repair Manual > Auxiliary. heater with control elements: Removing and installing/replacing intake silencer for independent/auxiliary heater
    WARNING: Risk of burning! Work on auxiliary heater may only be carried out when it has cooled down. Necessary preliminary work: Remove FRONT LEFT WHEEL ARCH COVER Removal: Pull air intake hose (1) off stationary/auxiliary heater. Unclip intake silencer (2) in marked area. Installatio ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0646