WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start-stop function is active.
An automatic engine start is possible.
Observe safety precautions when working on MSA vehicles.
Before carrying out practical work on the engine, always ensure that the MSA functionality is deactivated so as to prevent automatic engine starting while work is being carried out in the engine compartment.
MSA function is deactivated by:
Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.
When working with diagnosis tools: Observe instructions in diagnosis tool
BMW X3 Service & Repair Manual > Front axle repair instructions: Risk of injury if oil comes into contact with eyes and skin
Danger of injury!
Contact with eyes or skin may result in injury!
Possible symptoms are:
Impaired sight
Irritation of the eyes
Reddening of the skin
Rough and cracked skin
Protective measures/rules of conduct:
Wear safety goggles
Wear oil-resistant protective gloves
Observe co ...