Accessories Mechanical tool
NOTE: For detecting leaks in the refrigerant circuit
Adapter
Adapter AM
NOTE: (Sealing adapter) For closing off the line for the leakage test for E81, E87, E90, E91, E92, E93 (included in delivery from 02/2007)
SI number
01 09 07 (360)
NOTE: (Evaporator test adapter) E85, E86
SI number
01 04 08 (435)
NOTE: (Evaporator test adapter) PL2, formerly 64 5 107
SI number
01 04 08 (435)
NOTE: (Filler adapter) For sealing pressure line and connection to connecting hose (replaces special tool 64 5 101 from 01/2005)
NOTE: (Sealing adapter) Sealing adapter for closing off the line for the leakage test (included in delivery from 01/2005)
Adapter Mechanical tool
NOTE: For adjusting the expansion valve
Storage Location
X1
Adapter AM
NOTE: (Evaporator test adapter) E60, E61, E63, E64
SI number
01 04 08 (435)
Replaced by: 83300495257
NOTE: (Filling adapter) is replaced by 64 5 105 (from 01/2005) Replaced by 64 5 105 (0 495 257)
Adapter Minimum set: Mechanical tools AM
NOTE: For pressure test (via pressure drop test) on the evaporator of the air conditioning on all F2x and F3x vehicles.
SI number
08 06 14 (081)
Adapter AM
NOTE: Leak-tight adapter) For sealing the line during the evaporator leakage test in the E70 (included in the delivery specification from 02/2007)
SI number
01 09 07 (360)
NOTE: (Sealing adapter) For sealing suction connection on compressor
NOTE: (Evaporator test adapter) E46, E83, E70, R55, R56 (formerly 64 5 108)
NOTE: (Seal adapter) For closing off the intake pipe
NOTE: (Climate condenser test adapter)
SI number
01 04 08 (435)
ADAPTER CABLE
Adapter cable MP
NOTE: For fault finding in auxiliary heater and its periphery - model year: from 9/95
Storage Location
B117
BMW X3 Service & Repair Manual > Transmission shafts: Replacing output flange on transfer box at rear (atc450)
IMPORTANT:
After completing work, check transmission oil level and top up if necessary.
Use only the approved TRANSMISSION OIL .
NOTE:
Replace output flange only together with a new radial shaft seal.
Operations for removing output flange are identical to replacing RADIAL
SHAF ...