Tool Mechanical tool
NOTE: Clamping plate As of 08/2011, the previous special tool 31 3 353 receives this new item number
SI number
01 16 11 (738)
Tool Minimum set: Mechanical tools AM
NOTE: For removing and installing silent blocks in wishbone support brackets
Storage Location
B13
Consisting of:
1. Holding sleeve
NOTE: (Pressure sleeve) For pulling out and in/model series: E30, E46. Can no longer be ordered separately. Only available as part of set 31 2 130 = 83 30 0 491 913.
2. Holding sleeve
NOTE: (Pressure sleeve) For counter-holding/model series: E30 Replaced by 31 2 133. (0 491 916)
3. Holding sleeve
NOTE: (Pressure sleeve) For pulling out and in/model series: E30 All-wheel drive vehicle, E34, E36, E46 Can no longer be ordered separately. Only available as part of set 31 2 130 = 83 30 0 491 913.
Tool AM
NOTE: For removing and installing the silent blocks in the wishbones and leading links.
Storage Location
A13
Consisting of:
5 = Holding sleeve
NOTE: (Pressure sleeve) For gripping the wishbones and for removing and installing the silence blocks in the leading link. Discontinued, can only be ordered using complete tool
1 = Holding sleeve
NOTE: (Pressure sleeve) For removing and installing the silent blocks in the wishbone. Discontinued, can only be ordered using complete tool
2 = Holding sleeve
NOTE: (Pressure sleeve) For gripping the wishbones and for removing and installing the silence blocks in the leading link. Replaced by 31 1 054. (0 493 747)
3 = Holding sleeve
NOTE: (pressure sleeve) For gripping the leading link. Series: E24, E28, E32, E34 Discontinued, only available via complete tool
Tool Minimum set: Mechanical tools AM
NOTE: (Pressure bush tool) For removing and installing rubber mounts in trailing and leading links and in wishbones (E46/5)
Storage Location
B13
SI number
01 03 99 (418)
Consisting of:
4 = Holding sleeve
NOTE: (Push sleeve) For removing and installing. Series: E53, E83
1 = Holding sleeve
NOTE: (Push sleeve) As counter support when removing and installing. Series: E38, E39, E83 For removing and installing rubber mounts in wishbones/Model series: E46/5
2 = Holding sleeve
NOTE: (Pressure sleeve) For pulling out and in/model series: E38 Replaced by 31 2 263. (0 493 596)
3 = Holding sleeve
NOTE: (Push sleeve) For removing and installing Model series: E38, E39
Tool Mechanical tool
NOTE: The spare parts set (2 locking pins and 1 O-ring) for reorders corresponds to the previous special tool 31 3 342
SI number
01 16 11 (738)
Tool AM
NOTE: For pressing in the wheel bearing race - model year: up to 82
Consisting of:
1. Synchronising key
NOTE: For wheel bearing race, inner
2. Synchronising key
NOTE: For wheel bearing race, outer
Tool Minimum set: Mechanical tools AM
NOTE: (Extractor) For pressing off wishbone from steering stub.
Storage Location
C12
SI number
01 06 94 (801)
Consisting of:
6 = Shaped part
NOTE: (Shaped part) Pressing off wishbone from wheel control joint E53, E83
7 = Shaped part
NOTE: (Shaped part) Pressing off wishbone from wheel control joint E70. SI 1 01 07 (333)
1 = Shaped part
NOTE: (Shaped part)
2 = Shaped part
NOTE: (Shaped part)
3 = Spindle
4 = Screw
NOTE: (Pressure bolt) Replaced by 31 2 311 (0 495 800)
5 = Pin
NOTE: (Cylindrical pin)
Tool Mechanical tool
NOTE: Clamping plate As of 08/2011, the previous special tool 31 3 355 receives this new item number
SI number
01 16 11 (738)
Tool AM
NOTE: For removing and installing the silent blocks in the tension struts and wishbones.
Storage Location
Y10
Consisting of:
1. Holding sleeve
NOTE: (Pressure sleeve) for removal discontinued, available as part of set of special tools only
2. Holding sleeve
NOTE: (Pressure sleeve) for counterholding, discontinued, available as part of set of special tools only
3. Holding sleeve
NOTE: (Pressure sleeve) for installing discontinued, available as part of set of special tools only
BMW X3 Service & Repair Manual > HVAC: Refrigeration oil
2.0 REFRIGERATION OIL
OIL USED IN FREONÂ-CHARGED SYSTEMS
A mineral-based oil is used. The oil level in the compressor must be checked before filling an air conditioner
with refrigerant. It can be checked only if the system is without refrigerant.
Always check the oil level each time a new sys ...