BMW X3 Owners Manual: Odometer and trip odometer

BMW X3 Owners Manual / Controls / Displays / Odometer and trip odometer

Display

BMW X3. Display

  • Odometer, arrow 1.
  • Trip odometer, arrow 2.

Show/reset kilometers

Press the knob.

  • When the ignition is switched off, the time, the external temperature and the odometer are displayed.
  • When the ignition is switched on, the trip odometer is reset.
    Engine oil temperature
    Cold engine: the pointer is at the low temperature end. Drive at moderate engine and vehicle speeds. Normal operating temperature: the ...

    External temperature
    If the indicator drops to +37 ºF/+3 ºC or lower, a signal sounds. A Check Control message is displayed. There is an increased ri ...

    Other materials:

    BMW X3 Service & Repair Manual > Output shafts: Removing and installing/replacing both output shafts
    IMPORTANT: The RADIAL SHAFT SEAL FOR THE OUTPUT SHAFT should be renewed every time the output shaft is removed and installed. The circlip of the output shaft must be replaced after re-installation. NOTE: The procedure is described in PRESSING OUTPUT SHAFT OUT OF DRIVE FLANGE AN ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0838