BMW X3 Owners Manual: At a glance

BMW X3 Owners Manual / Controls / Safety / Intelligent Safety / At a glance

Button in the vehicle

BMW X3. Button in the vehicle

Intelligent Safety button

Switching on/off

Some Intelligent Safety systems are automatically active after every departure. Some Intelligent Safety systems activate according to the last setting.

Press button briefly:

The menu for the intelligent safety system is displayed. The systems are individually switched off according to their respective settings.
LED lights up orange or goes out respective to their individual settings.

Adjust as needed. Individual settings are stored for the profile currently in use.

Press button again:

All Intelligent Safety systems are activated.
The LED lights up green.

Hold down button:

All Intelligent Safety systems are turned off.
The LED goes out.

Front-end collision warning

Depending on the equipment, the collision warning system consists of one of the two systems:

Front-end collision warning with City Braking function
Front-end collision warning with braking function

The concept

Intelligent Safety enables central operation of the driver assistance system. Depending on how the vehicle is equipped, Intelligent Safety consists ...

Front-end collision warning with City Braking function

...

Other materials:

BMW X3 Service & Repair Manual > Output shafts: Removing and installing/replacing both output shafts
IMPORTANT: The RADIAL SHAFT SEAL FOR THE OUTPUT SHAFT should be renewed every time the output shaft is removed and installed. The circlip of the output shaft must be replaced after re-installation. NOTE: The procedure is described in PRESSING OUTPUT SHAFT OUT OF DRIVE FLANGE AN ...