Brightness With the rearview camera switched on:
1. Select the symbol.
2. Turn the controller until the desired setting is reached, and press the controller.
Contrast With the rearview camera switched on:
1. Select the symbol.
2. Turn the controller until the desired setting is reached, and press the controller.
System limits
Detection of objects Very low obstacles as well as high, protruding objects such as ledges may not be detected by the system.
Assistance functions also take into account data of the PDC.
Follow instructions in the PDC chapter.
The objects displayed on the Control Display under certain circumstances are closer than they appear. Do not estimate the distance from the objects on the display.
BMW X3 Service & Repair Manual > Control arms and struts: Replacing an upper wishbone
IMPORTANT:
The wishbone must be installed with the opening (U-section) facing downward!
If the wishbone is bent, the screw connection between the control arm and wheel carrier
must be replaced.
Necessary preliminary work:
Remove REAR WHEEL .
Release left and right scr ...