Display on the Control Display The area surrounding the vehicle can be displayed on the Control Display.
The display appears as soon as Top View is activated.
When the image of the rearview camera is displayed,
it is possible to reel to top view:
"Rear view camera"
Brightness
With Top View switched on:
1. Select the symbol.
2. Turn the controller until the desired setting is reached, and press the controller.
Contrast
With Top View switched on:
1. Select the symbol.
2. Turn the controller until the desired setting is reached, and press the controller.
Displaying the turning radius and pathway lines
The lane line depends on the engaged gear and the current steering angle. The track line is continuously adjusted for the steering wheel movement.
"Parking aid lines"
Turning circle and pathway lines are displayed.
System limits
A Check Control message is displayed when a camera is defective.
BMW X3 Service & Repair Manual > Engine wiring loom: Replacing section of wiring harness for injectors (N47 D20 O1)
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE
(ESD PROTECTION) .
Necessary preliminary work:
Read out the fault memory of the DDE control unit.
Switch off ignition.
Disconnect BATTERY EARTH LEAD .
Remove INTAKE FILTER HOUSING .
Remove rear aco ...