BMW X3 Owners Manual: Status display

The concept The engine oil level is monitored electronically while driving and shown on the Control Display.

If the engine oil level reaches the minimum level, a check control message is displayed.

Requirements A current measured value is available after approx.

30 minutes of driving. During a shorter trip, the status of the last, sufficiently long trip is displayed.

With frequent short-distance trips, regularly perform a detailed measurement.

Displaying the engine oil level

1. "Vehicle info"

2. "Vehicle status"

3. "Engine oil level"

Engine oil level display messages Different messages appear on the display depending on the engine oil level. Pay attention to these messages.

If the engine oil level is too low, within the next 125 miles/200 km Add engine oil.

Engine oil level too low

Add engine oil immediately; otherwise, an insufficient amount of engine oil could result in engine damage.

Take care not to add too much engine oil.

Too much engine oil

Have the vehicle checked immediately; otherwise, surplus engine oil can lead to engine damage.

    Electronic oil measurement
    ...

    Detailed measurement
    The concept In the detailed measurement the engine oil level is checked and displayed via a scale. Gasoline engine: If the engine oil level reache ...

    Other materials:

    BMW X3 Owners Manual > Things to remember when driving: Breaking-in period
    General information Moving parts need time to adjust to one another (break-in time). The following instructions will help accomplish a long vehicle life and good efficiency. During break-in, do not use the Launch Control. Engine, transmission, and axle drive Up to 1,200 miles/2,000 km Do ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0102