BMW X3 Service & Repair Manual: Raising vehicle with trolley jack

Observe the following trolley-jack-related instructions:

1. Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used!

2. Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!

3. Check the rubber plate on the trolley jack prior to each use, replacing if necessary.


IMPORTANT: All-wheel drive vehicles may only be raised with the stiffening plate fitted on the front axle! Raising directly on the front axle support without stiffening plate is not permissible!

WARNING: The vehicle may be raised with a trolley jack only at the following mounting point!

  1. Car jacking point
  2. Side car jacking points
  3. Rear axle final drive

NOTE: It is not permitted to raise the vehicle at the rear differential cover!


Risk of damage! Jacking point (1) must be present! Align the rubber plate on the trolley jack to the jacking point (1) in such a way that there is no contact to adjacent components and that they are therefore not damaged.


    Notes on repairing threads (B)
    IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread. NOTE: Damaged threads on the engine support may be re ...

    Risk of injury if oil comes into contact with eyes and skin
    Danger of injury! Contact with eyes or skin may result in injury! Possible symptoms are: Impaired sight Irritation of the eyes Reddening of ...

    Other materials:

    BMW X3 Service & Repair Manual > Front axle: Bolt
    Bolt AM Replaced by: 83300492053 NOTE: Replaced by 32 3 090. (0 492 053) Bolt Mechanical tool NOTE: (drive pin) For radial gears in the front axle differential for checking the coefficient of friction BRIDGE Bridge Minimum set: Mechanical tools AM NOTE: (Support bridge) ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright - 0.0797