BMW X3 Service & Repair Manual: Shaped part
Shaped part AM
NOTE: (Shaped part)
Storage Location
Y8
Shaped part AM
NOTE: For removing the wheel bearing inner race from the drive flange hub in combination with special tool 33 4 400 and hydraulic tool 81 64 2 160 009.
Storage Location
C29
C30
SI number
01 15 11 (737)
Shaped part Minimum set: Mechanical tools AM
In conjunction with: 33 5 120 = 0495851
NOTE: For pressing output shaft out of rear axle final drive.
SI number
01 28 09 (600)
Shaped part Minimum set: Mechanical tools AM
NOTE: For driving output shaft into rear axle final drive.
SI number
01 28 09 (600)
Shaped part AM
NOTE: (Shaped part)
Shaped part Minimum set: Mechanical tools AM
NOTE: (Shaped part) 2 pieces Model series: E38, E39, E46 Deletion, only available via tool set
Storage Location
B8
Shaped part Minimum set: Mechanical tools AM
NOTE: (Shaped part)
Shaped part Minimum set: Mechanical tools AM
NOTE: (Shaped part) 2 pieces Model series: E39/2, E65, E67, RR1
Shaped element
Shaped element Minimum set: Mechanical tools AM
NOTE:
(Shaped element) shaped element (bearing shell) available as part of set of
special tools 33 ...
Shell
Shell AM
Replaced by: 83300493416
NOTE:
(Shell) Model series: E31, E38 Discontinuation and replaced by 33 4 400. (0 493
416)
Shell AM
Replace ...
Other materials:
BMW X3 Service & Repair Manual > Control arms and struts: Replacing a control arm
Release screw.
Installation note:
Replace screw.
Tighten down screw connection in NORMAL POSITION .
IMPORTANT:
When installing, ensure that the tapered side of the bearing bush is connected first toward the
wheel carrier.
Slacken nut (1).
Unscrew bolt towards rear and remove c ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
