BMW X3 Service & Repair Manual: Tpms reminder reset - procedure 4

NOTE: The initialization finishes during driving, which can be interrupted at any time.

When driving resumes, the initialization is continued automatically.

  1. Set the tire pressure of all wheels to specification.
  2. Press "MENU" button to open start menu.
  3. Open the i-menu of the Control Center.
  4. Select "SETTINGS" and press the controller.
  5. Select "VEHICLE" and press the controller.
  6. Select "TIRES: TPM" and press controller.
  7. Start engine, but do not start driving.
  8. Select "RESET" and press the controller.
  9. Select "YES" and press the controller.
  10. Drive vehicle. The message "RESETTING TPM...." will be displayed. Initialization is automatically completed during the drive. When initialization is complete, "STATUS: TPM ACTIVE" message will be displayed.

DTC

    Tpms reminder reset - procedure 3
    NOTE: The initialization finishes during driving, which can be interrupted at any time. When driving resumes, the initialization is continued aut ...

    Tpms reminder reset - procedure 5
    CAUTION: When driving with snow chains or a space-saver spare tire, DO NOT initialize the system. 1. Set the tire pressure of all wheels to specific ...

    Other materials:

    BMW X3 Owners Manual > Mobility System: Distributing the sealant
    Immediately drive approx. 5 miles/10 km to ensure that the sealant is evenly distributed in the tire. Do not exceed a speed of 50 mph/80 km/h. If possible, do not drive at speeds less than 12 mph/20 km/h. To correct the tire inflation pressure 1. Stop at a suitable location. 2. Screw t ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0501