BMW X3 Service & Repair Manual: Tpms reminder reset - procedure 6

Resetting TPM With iDrive

  1. Set the tire pressure of all wheels to specification.
  2. Turn ignition switch ON.
  3. Press controller to call up I menu.
  4. Select SETTINGS and press controller.
  5. Select CAR/TIRES and press controller.
  6. If necessary, switch to top field and select TIRES/RDC and press controller.
  7. Start engine.
  8. Select CONFIRM TIRE PRESSURE and press controller.
  9. Drive vehicle. Initialization is automatically completed during the drive, without any feedback issued.

DTC

Resetting TPM Without iDrive

  1. Set the tire pressure of all wheels to specification.
  2. Start engine.
  3. Move turn signal lever up or down until TPM warning symbol and RESET appears.
  4. Press BC button on end of turn signal lever to confirm selection.
  5. Press and hold BC button for approximately 5 seconds until a CHECK/TICK appears after RESET.
  6. Drive vehicle. Initialization is automatically completed during the drive, without any feedback issued.

DTC

    Tpms reminder reset - procedure 5
    CAUTION: When driving with snow chains or a space-saver spare tire, DO NOT initialize the system. 1. Set the tire pressure of all wheels to specific ...

    Tpms reminder reset - procedure 7
    ...

    Other materials:

    BMW X3 Service & Repair Manual > Propeller shaft assembly: Removing and installing front propeller shaft
    IMPORTANT: Do not move vehicle under its own drive power once propeller shaft has been removed. IMPORTANT: On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of. Necessary preliminary tasks: Remove un ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0587