BMW X3 Service & Repair Manual: Replacing the button caps of the heating and air conditioning system control panel

BMW X3 Service & Repair Manual / HVAC / Heater with operation / Replacing the button caps of the heating and air conditioning system control panel

Special tools required:

  • 00 9 340

Tape area (1) around the button caps with adhesive tape.

HVAC

Press blower rocker switch (1) on one side and pry it off on the other side with special tool 00 9 340 .

HVAC

Pry off remaining button caps (1) with special tool 00 9 340 .

HVAC

Clip in button caps (1) into operating unit.

Remove adhesive tape.

HVAC

Check function of the air conditioning.

    Replacing servodrive for footwell flap (automatic a/c)
    Necessary preliminary work: Remove RIGHT GLOVE BOX WITH HOUSING Release screws (1). Detach actuator drive for footwell flap (2). Release ...

    Auxiliary. heater with control elements
    ...

    Other materials:

    BMW X3 Service & Repair Manual > Transmission in general: Checking/topping up oil level in automatic transmission (GA8HP45Z, GA8HP50Z, GA8HP90Z)
    IMPORTANT: Do not let skin come in contact with transmission oil and do not inhale fuel vapors. Wear protective gloves. Ensure adequate ventilation IMPORTANT: Use only the approved TRANSMISSION OIL . To set the correct level, it is mandatory that the service function "T ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0471