BMW X3 Service & Repair Manual: Removing and installing or replacing fuel pump (auxiliary heater)
Special tools required:
- 13 3 010
Recycling
Fuel escapes when fuel lines are detached. Have a suitable collecting vessel ready.
Catch and dispose of escaping fuel.
Observe country-specific waste disposal regulations.
Seal off fuel hoses at fuel pump with special tool 13 3 010 .
Necessary preliminary work:
- Remove LEFT UNDERBODY PANELLING
Removal:
Release hose clamps (1) and pull fuel lines off.
Unlock and disconnect connector (2).
Release screw (3).
Remove electric fuel pump (4).
Installation:
Mount electric fuel pump (4) and tighten screw (3).
Insert fuel lines and fasten with new hose clamps (1).
Connect connector (2).
NOTE: Observe direction of flow of fuel pump (4).
Required reworking:
- Mount LEFT UNDERBODY PANELLING
Removing and installing or replacing complete independent heater with
bracket
WARNING: Risk of burning!
Work on auxiliary heater may only be carried out when it has cooled down.
NOTE: CLAMP OFF coolant hoses on independent h ...
Removing and installing/replacing complete electric auxiliary heating
Risk of burning!
Carry out repair work only after engine has cooled down.
Necessary preliminary work:
Remove SUPPORT FOR DASHBOARD
Fold up th ...
Other materials:
BMW X3 Service & Repair Manual > Rear axle: Plate
Plate AM
NOTE: (Shaped plate, top) For pulling in
Plate Minimum set: Mechanical tools AM
NOTE: (Fixing plate) With screws Deletion, only available via tool set
Plate AM
NOTE: (Shaped plate, bottom) For pulling in
Plate AM
NOTE: (Shaped plate, top) For removing
Plate AM
NOTE:
(adap ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
