Holding sleeve AM
NOTE: (Pressure sleeve) For gripping the wishbones and for removing and installing the silence blocks in the leading link. Discontinued, can only be ordered using complete tool
Holding sleeve Minimum set: Mechanical tools AM
Replaced by: 83300491916
NOTE: (Pressure sleeve) For counter-holding/model series: E30 Replaced by 31 2 133.
(0 491 916)
Storage Location
B13
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Push sleeve) For removing and installing. Series: E53, E83
Storage Location
B13
Holding sleeve AM
NOTE: (Pressure sleeve) for counterholding, discontinued, available as part of set of special tools only
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Pressure sleeves) For removing and installing the rubber mount in the trailing link of the front axle
Storage Location
B13
SI number
01 12 95 (992)
Consisting of:
1. Holding sleeve
NOTE: (Pressure sleeve) for counterholding, discontinued, available as part of set of special tools only
2. Holding sleeve
NOTE: (Pressure sleeve) For removing and installing
Holding sleeve AM
Replaced by: 83300493555
NOTE: (Centring sleeve) Internal thread M18x1.5 Replaced by 31 3 340 (0 493 555)
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Pressure sleeve) For pulling out and in/model series: E30 All-wheel drive vehicle, E34, E36, E46 Can no longer be ordered separately. Only available as part of set 31 2 130 = 83 30 0 491 913.
Storage Location
B13
Holding sleeve AM
Replaced by: 83300493555
NOTE: (Centring sleeve) Internal thread M12x1.5 Replaced by 31 3 340 (0 493 555)
Holding sleeve AM
Replaced by: 83300493747
NOTE: (Pressure sleeve) For gripping the wishbones and for removing and installing the silence blocks in the leading link. Replaced by 31 1 054. (0 493 747)
Holding sleeve AM
NOTE: Sleeve C1 in connection with adapter kit 1 (BMW), (81 64 2 155 745) and MINI adapter kit (81 64 2 294 517), for removal and installation of wheel bearings, propeller shafts and drive flanges.
SI number
08 06 09 (544)
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Push sleeve) As counter support when removing and installing. Series: E38, E39, E83 For removing and installing rubber mounts in wishbones/Model series: E46/5
Storage Location
B13
Holding sleeve AM
Replaced by: 83300493555
NOTE: (Centring sleeve) Internal thread M10x1 Replaced by 31 3 340 (0 493 555)
Holding sleeve AM
Replaced by: 83300493555
NOTE: (Centring sleeve set for piston rod/shock absorber) Spring tensioner 31 3 110/111 for tensioning coil springs/Replaced by 31 3 340 (0 493 555)
Consisting of:
1. Spring tensioner
NOTE: Replaced by 31 3 340 (0 493 555)
2. Holding sleeve
NOTE: (Centring sleeve) Replaced by 31 3 340 (0 493 555)
3. Holding sleeve
NOTE: (Centring sleeve) Internal thread M18x1.5 Replaced by 31 3 340 (0 493 555)
4. Holding sleeve
NOTE: (Centring sleeve) Internal thread M10x1 Replaced by 31 3 340 (0 493 555)
5. Holding sleeve
NOTE: (Centring sleeve) Internal thread M12x1.5 Replaced by 31 3 340 (0 493 555)
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Pressure sleeve) For removing and installing
Holding sleeve AM
NOTE: (Pressure sleeve) for removal discontinued, available as part of set of special tools only
Holding sleeve AM
NOTE: (pressure sleeve) For gripping the leading link. Series: E24, E28, E32, E34 Discontinued, only available via complete tool
Holding sleeve AM
NOTE: Sleeve H1 (removing gear finding component) in connection with adapter kit 1 (BMW), (81 64 2 155 745), for removal and installation of wheel bearings, propeller shafts and drive flanges.
SI number
08 06 09 (544)
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Pressure sleeve) for counterholding, discontinued, available as part of set of special tools only
Holding sleeve AM
Replaced by: 83300493555
NOTE: (Centring sleeve) Replaced by 31 3 340 (0 493 555)
Holding sleeve AM
NOTE: (Pressure sleeve) for installing discontinued, available as part of set of special tools only
Holding sleeve Minimum set: Mechanical tools AM
Replaced by: 83300493596
NOTE: (Pressure sleeve) For pulling out and in/model series: E38 Replaced by 31 2 263. (0 493 596)
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Pressure sleeve) For pulling out and in/model series: E30, E46. Can no longer be ordered separately. Only available as part of set 31 2 130 = 83 30 0 491 913.
Storage Location
B13
Holding sleeve AM
NOTE: Sleeve E1 (M24) in connection with adapter kit 1 (BMW), (81 64 2 155 745), for removal and installation of wheel bearings, propeller shafts and drive flanges.
SI number
08 06 09 (544)
Holding sleeve Mechanical tool
NOTE: For counter support when pressing the knurled bolts into the support bearing (spring strut)
Storage Location
B22
Holding sleeve AM
NOTE: (Pressure sleeve) For removing and installing the silent blocks in the wishbone.
Discontinued, can only be ordered using complete tool
Holding sleeve Minimum set: Mechanical tools AM
NOTE: (Push sleeve) For removing and installing Model series: E38, E39
Storage Location
B13
HYDRAULIC CYLINDERS
Hydraulic cylinders AM
NOTE: Hydraulic cylinder (hydraulic actuator) in connection with lever, (81 64 2 156 247), for removal and installation of wheel bearings, propeller shafts and drive flanges.
SI number
08 06 09 (544)
BMW X3 Service & Repair Manual > Front axle: Fork
Fork Mechanical tool
NOTE: (Press-off fork) For pressing the output shaft off of the front axle differential
(all-wheel drive vehicles)
SI number
01 17 05 (212)
Fork AM
NOTE: (Separating fork)
Fork AM
NOTE:
(Separating fork) for separating the conical seat at the wheel g ...