BMW X3 Service & Repair Manual: Safety instructions for handling oil

WARNING: DANGER OF POISONING if oil is ingested/absorbed through the skin! RISK OF INJURY if oil comes into contact with eyes and skin!

Recycling:

Observe country-specific waste disposal regulations.

Measures if oil is unintentionally released:

  • Personal precautionary measures: Danger of slipping! Keep noninvolved persons away from the work area. Wear personal protective clothing/equipment.
  • Environmental protection measures: Prevent oil from draining into drain channels, sewerage systems, pits, cellars, water and the ground.
  • Limiting spread: Use oil blocks to prevent the surface spread of oil.
  • Cleaning procedure: Bind and dispose of escaped oil with nonflammable absorbents.

NOTE: Do not flush oil away with water or aqueous cleaning agents.

    Safety information for working on vehicles with automatic engine start-stop function (msa)
    WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start ...

    Front control and suspension elements
    REMOVING AND INSTALLING COMPLETE LEFT OR RIGHT SPRING STRUT (EDC) NOTE: Work is identical to Removing and installing front spring strut . REPLACING ...

    Other materials:

    BMW X3 Service & Repair Manual > Output shafts: Removing and installing/replacing both output shafts
    IMPORTANT: The RADIAL SHAFT SEAL FOR THE OUTPUT SHAFT should be renewed every time the output shaft is removed and installed. The circlip of the output shaft must be replaced after re-installation. NOTE: The procedure is described in PRESSING OUTPUT SHAFT OUT OF DRIVE FLANGE AN ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0121