BMW X3 Service & Repair Manual: Instructions for removing and installing ear clips

BMW X3 Service & Repair Manual / Suspension / Steering arms, tie rods, steer. damper / Instructions for removing and installing ear clips

Special tools required:

  • 32 1 260

NOTE: The work steps are show on assorted components. Ear clip must always be replaced.

To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

Suspension

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Suspension

Attach hook fastener and press ear together with special tool 32 1 260.

Suspension

The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.

Suspension

IMPORTANT: Gap (A) max. 1 mm!

Suspension

    Steering arms, tie rods, steer. damper
    ...

    Removing and installing/replacing left or right track rod end
    Special tools required: 31 2 300 NOTE: If the track rod end to track rod screw connection is released, it is necessary after reinstallation ...

    Other materials:

    BMW X3 Service & Repair Manual > Automatic transmission: Holder
    Holder Mechanical tool NOTE: (Counter support) For releasing and tightening the gear selector cable/transmission with position switch Storage Location A4 SI number 01 06 92 (509) Holder Minimum set: Mechanical tools AM NOTE: For securing converter during removal and installation of tra ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2023 Copyright www.bmwx3tech.com - 0.0775