Device Mechanical tool
NOTE: For holding down the drop arm when checking the mechanical play in the power steering box
Device Mechanical tool
NOTE: For holding down the drop arm when checking mechanical play in the hydro- steering gear - model year: from 82
Device Mechanical tool
NOTE: For holding down the drop arm when checking mechanical play in the hydro- steering gear - model year: up to 82
Device AM
NOTE: For removing and installing the fluid blocks in the track-rod arm
Storage Location
X6
Consisting of:
1. Mandrel
2. Holding sleeve
Device AM
NOTE: For removing and installing lock pin on steering column adjustment - replace steering column adjustment lever
Storage Location
A12
SI number
01 05 95 (932)
Consisting of:
1. Basic body
NOTE: (Basic body)
2. Tool
NOTE: (Shaped element) discontinued, available as part of set of special tools only
3. Nut
NOTE: (Thrust nut)
4. Bolt
NOTE: (Pressure pin) discontinued, available as part of set of special tools only
Device Mechanical tool
NOTE: For holding down the drop arm when checking the mechanical play in the power steering box
SI number
01 04 86 (566)
DOUBLE-HEAD BOX WRENCH
Double-head box wrench Mechanical tool
NOTE: (Open double ring spanner AF 17/19) For installing and removing the pipe bend on the power steering pump - model: 520, 525, 2500...3.3L, 2800CS, 2800CSA, 3.0CS, 3.0CSA
Storage Location
B10
EXTENSION
Extension Minimum set: Mechanical tools AM
NOTE: For torque wrench Available only as a complete tool set 32 3 150 (83 30 0 493 649) - as of 13.07.2012.
BMW X3 Service & Repair Manual > Electronic components: Replacing one front pulse generator
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE
(ESD protection).
Necessary preliminary work:
Remove front WHEEL .
Read and comply with GENERAL INFORMATION.
Unclip line from holder (1).
Open housing cover.
Disconnect plug connection (2).
I ...