Device Minimum set: Mechanical tools Mechanical tool
NOTE: (funnel) For filling the transmission with transmission oil
NOTE: (Tensioning device) For removal and installation of the snap ring before the centring plate on ZF transmissions
NOTE: (device) For determining the shims on the brake C
Storage Location
Y6
SI number
01 14 93 (718)
Device Minimum set: Mechanical tools AM
NOTE: (Pulling device) For pulling off the radial seal of the selector shaft/transmission with positioning switch
Storage Location
B3
SI number
01 02 95 (896)
Consisting of:
- Use
- Bush
Device AM
NOTE: For leak-testing the torque converter
Storage Location
X6
Consisting of:
1. Basic body
NOTE: (Basic body) transmission: 3 HP 12, 4 HP 24
2. Screw
NOTE: (Retaining screws (2 x)) Transmission: 3 HP 12
3. Clip
NOTE: (Retaining clip) transmission: 3 HP 12, 4 HP 24, A4S 270R, A4S 310R
4. Screw
NOTE: (Retaining screws (2 x)) for torque converter/transmission: 4 HP 24, A4S 270R, A4S 310R
Device AM
NOTE: (Dismantling and mounting device) For removing and installing the D/E cylinder with planetary gear set. Discontinued as of 10/2010.
Storage Location
Y5
Y6
SI number
01 01 95 (892)
Consisting of:
1. Handle
NOTE: Discontinued as of 10/2010
2. Spindle
NOTE: (Spindle with knurled nut) Discontinued as of 10/2010
3. Bush
NOTE: (Centring bush) Discontinued, can only be ordered as part of complete tool 11 4 200 = 0491020.
Device Minimum set: Mechanical tools Mechanical tool
NOTE: (locating fixture) For securing converter during removal and installation of transmission.
Storage Location
A20
B20
SI number
01 23 05 (224)
Device AM
NOTE: (Retainer) for removing and installing the disc set
Storage Location
Z7
Consisting of:
1. Washer
2. Ring
3. ShellNOTE: (Bearing shell) 2 pieces
Device Minimum set: Mechanical tools AM
NOTE: For removing and installing the radial shaft seal of the gearshift shaft 24 5 361, 24 5 362, 24 5 364 and 24 5 366 for E90
Storage Location
C4
SI number
01 14 96 (105)
Consisting of:
6 = Bush
NOTE: For fitting the radial shaft seal on the selector shaft (emergency release) Transmission: GA6 HP26Z Deletion, only available via tool set
1 = Bush
NOTE: (Threaded bush)
2 = Nut
NOTE: (Union nut) Deletion, only available via tool set
3 = Bush
NOTE: For transmission without positioning switch Transmission: A4S 310R Deletion, only available via tool set
4 = Nut
5 = Holding sleeve
NOTE: (Sliding sleeve (5 pieces)) Transmission: A4S 310R Deletion, only available via tool set
Device Mechanical tool
NOTE: (Device) For leakage test of torque converter
Storage Location
X6
Device AM
NOTE: Removal and mounting device) For removing and installing the drive clutch A/B/C
Storage Location
Y2
Z2
SI number
01 01 95 (892)
Consisting of:
1. Pipe
NOTE: (Jack tube with ring bolt)
2. Pin
NOTE: (Locking pin)
Device AM
NOTE: (Device)
Storage Location
A23
Individual
Consisting of:
1. Basic body
NOTE: (Basic body)
2. Screw
NOTE: (Mounting bolt (2 pieces))
NOTE: (Lifting gear) For removing and installing the brake clutch unit D/G incl. the parking lock gear
Storage Location
Y3
Z3
SI number
01 14 93 (718)
NOTE: For removing the sealing cap for working piston, clutch 4
Storage Location
C42
SI number
01 04 02 (835)
Consisting of:
Device Minimum set: Mechanical tools Mechanical tool
NOTE: For E72 hybrid. For removing and installing the ORC clutch.
SI number
01 18 10 (660)
Device Mechanical tool
NOTE: For leak-testing the torque converter
NOTE: (Pressing device) For removing and installing the piston (cover) at brake C
Storage Location
Y6
SI number
01 14 93 (718)
Device AM
NOTE: (Device) Tool set for dismantling and fitting the R gear piston. For dismantling and assembling the transmission for "Sealing the intermediate plate".
SI number
01 22 97 (239)
Consisting of:
1. Plate
NOTE: (Pressure plate) For removing and installing the spring cup
2. Spindle
NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer/For removing and installing the spring cup
3. Pin
NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case
4. Bush
NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate
Device Mechanical tool
NOTE: For fixing torque converter in position while removing and installing transmission.
Storage Location
Individual
Device AM
NOTE: For checking the side clearance of the drive shaft
Storage Location
Y3
Consisting of:
1. Holder
NOTE: (Dial gauge holder)
2. Terminal
NOTE: (Terminal)
Device AM
NOTE: For removing and installing oil pump
Storage Location
Z1
Z2
SI number
01 09 90 (282)
Consisting of:
1. Pipe
NOTE: (Holding tube) discontinued, available as part of set of special tools only
2. Spindle
NOTE: (Threaded spindle) Deletion, only available via tool set
3. Ring
NOTE: (Clamping ring) discontinued, available as part of set of special tools only
4. Ring
NOTE: (Clamping ring) Gearbox: GA6HP19Z, GA6HP26Z Deletion, only available via tool set
Device AM
NOTE: (Assembly and disassembly tool) For removing and installing brake clutch F
Storage Location
Z3
Z4
SI number
01 01 95 (892)
Consisting of:
1. Handle
NOTE: (Handle)
2. Nut
NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504)
3. Handle
NOTE: (Centring handle)
Device Minimum set: Mechanical tools Mechanical tool
NOTE: To secure the converter when removing and installing the transmission.
Storage Location
B30
SI number
01 27 11 (764)
Device Mechanical tool
Replaced by: 83300491731
NOTE: For firmly holding torque converter in position while removing and fitting the transmission. Replaced by 24 4 130 (0 491 731)
BMW X3 Service & Repair Manual > Air conditioning, leak detection: Note for handling r134a refrigerant
Work on the refrigerant circuit may only be carried out by experts!
Avoid all contact with liquid or gaseous R134a. Wear safety goggles and gloves when working on the
refrigerant circuit.
FOLLOW SAFETY INFORMATION FOR HANDLING R134A REFRIGERANT.
WARNING: Although R134a at normal temperatu ...