Fixture Mechanical tool
Replaced by: 83300495498
NOTE: (Fixture for transmission) For removing and installing the transmission.
Replaced by 23 4 050 (0 495 498)
SI number
01 08 96 (080)
Fixture AM
NOTE: For mounting gearbox on assembly stand.
SI number
01 27 06 (328)
Consisting of:
1. Basic body
NOTE: Discontinued, can only be ordered using complete tool
2. Spindle
NOTE: (Spindle with thrust piece) Discontinued, only available via tool set
3. Spindle
NOTE: (Spindle with screw) Deletion, only available via tool set
4. Shaped part
NOTE: (Shaped part)
5. Adapter
NOTE: (Adapter (long)) Deletion, only available via tool set
6. Adapter
NOTE: (Adapter (medium)) Deletion, only available via tool set
7. Adapter
NOTE: (Adapter (short)) Deletion, only available via tool set
Fixture Mechanical tool
NOTE: (Fixture for drive flange) When undoing the slotted nut
SI number
01 09 90 (282)
Fixture AM
Replaced by: 83300495446
NOTE: For mounting gearbox on assembly stand. Replaced by 24 0 200 (0 495 446)
SI number
01 06 92 (509)
Consisting of:
5 = Adapter
NOTE: Replaced by 24 0 205 (0 495 492)
1 = Frame
NOTE: (Main frame)
2 = Spindle
NOTE: (Pressure spindle with star handle)
3 = Spindle
NOTE: Replaced by 24 0 184 (0 491 656)
4 = Spindle
NOTE: (spindle, long (2 pieces))
Fixture AM
Replaced by: 83300495498
NOTE: For removing and installing transmission. Replaced by 23 4 050 (0 495 498)
SI number
01 06 92 (509)
Consisting of:
3 = Screw
NOTE: (Adjusting screw) Discontinuation and replaced by 23 4 050 (0 495 498)
NOTE: (Fixture) attachment B.W. transmission, until January of 84
Fixture Mechanical tool
NOTE: (Support for automatic transmission) Other: Only Japan and South Africa
Fixture Mechanical tool
Replaced by: 83300491642
NOTE: (support) For removing and fitting the transmission. Replaced by 24 0 130 in March 87
Fixture Mechanical tool
Replaced by: 83300495498
NOTE: (Fixture for transmission) For removal and installation Replaced by 23 4 050 (0 495 498)
SI number
01 02 87 (721)
Fixture AM
In conjunction with: 00 2 300 ASSEMBLY STAND 0495187
NOTE: For mounting transmission on assembly stand 00 2 300 and for transport.
SI number
01 29 09 (601)
FRAME
Frame AM
NOTE: (Main frame)
NOTE: (Main frame)
BMW X3 Service & Repair Manual > Control arms and struts: Replacing an upper wishbone
IMPORTANT:
The wishbone must be installed with the opening (U-section) facing downward!
If the wishbone is bent, the screw connection between the control arm and wheel carrier
must be replaced.
Necessary preliminary work:
Remove REAR WHEEL .
Release left and right scr ...