BMW X3 Service & Repair Manual: Installing distributor exchange transmission (atc 450)

BMW X3 Service & Repair Manual / Transmission / Transfer box / Installing distributor exchange transmission (atc 450)

IMPORTANT: Before and after replacement, execute the "Repair" service function with the BMW diagnosis system.

Recycling: Catch and dispose of escaping transmission oil. Observe country-specific waste disposal regulations

Necessary preliminary tasks:

  • Drain transmission oil at oil drain plug
  • Remove TRANSFER BOX

Modify following parts:

  • Covers and protective caps
  • Drive shaft transportation retainer
  • Vent hose of transfer box
  • If required, replace rubber mount .

IMPORTANT: After completing work, check transmission oil level and top up if necessary.

Release filler plug (1).

Check oil level.

Pour in transmission oil up to lower edge of opening for filler plug (1).

Use only the approved TRANSMISSION OIL .

Transmission

Failure to comply with this requirement will result in serious damage to the transfer box!

    Transfer box
    ...

    Installing exchange transfer box (atc 45l)
    IMPORTANT: Before and after replacement, execute the "Repair" service function with the BMW diagnosis system. Recycling: Catch and dispose ...

    Other materials:

    BMW X3 Service & Repair Manual > Auxiliary. heater with control elements: Replacing changeover valve for independent/auxiliary heating
    WARNING: Risk of scalding! Only perform the following repair work on an engine that has cooled down. FOLLOW NOTES FOR REPAIR WORK ON COOLING SYSTEM . NOTE: DISCONNECT coolant hoses from changeover valve for independent/auxiliary heater. Necessary preliminary tasks: REMOVE FRONT LEFT WHE ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0277