BMW X3 Owners Manual: Activating HDC
Press button; the LED above the
button
lights up.
Deactivating HDC
Press button again and the LED
goes
out. HDC is automatically deactivated
above approx. 37 mph/60 km/h.
Display in the instrument cluster
The selected speed is displayed
in the speedometer.
- Green: the system is actively braking the vehicle.
- Orange: the system is on standby.
Malfunction
A message is displayed in the instrument cluster.
HDC is not available, e.g., due to elevated brake temperatures.
Increasing or decreasing vehicle speed
Specify desired speed in the range from approx.
4 mph/6 km/h to approx. 15 mph/25 km/h
using the rocker switch of the cruise control on
the steer ...
Dynamic Damping Control
The concept
This system reduces undesirable vehicle motion
when using a dynamic driving style or traveling
on uneven road surfaces.
The system e ...
Other materials:
BMW X3 Service & Repair Manual > Rear trim panel: Replacing outer tail panel section
Read contents of BODY, GENERAL.
Observe (REPAIR STAGE 2) procedure!
STRIP DOWN vehicle.
The following new body parts are required:
(1) Rear trim panel
Following CONSUMABLES are required:
Removing rear trim panel
IMPORTANT: Cut outer panel only.
Cut severance cuts (1) ...