BMW X3 Owners Manual: Leather care
Remove dust from the leather often, using a cloth or vacuum cleaner.
Otherwise, particles of dust and road grime chafe in pores and folds, and lead to increased wear and premature degradation of the leather surface.
To guard against discoloration, such as from clothing, provide leather care roughly every two months.
Clean light-colored leather more frequently because soiling on such surfaces is substantially more visible.
Use leather care products; otherwise, dirt and grease will gradually break down the protective layer of the leather surface.
Suitable care products are available from the service center.
Car care products
BMW recommends using care and cleaning
products from BMW, since these have been
tested and approved.
Car care and cleaning products
Follow the ins ...
Upholstery material care
Vacuum regularly with a vacuum cleaner.
If upholstery is very dirty, e.g., with beverage
stains, use a soft sponge or microfiber cloth
with a sui ...
Other materials:
BMW X3 Service & Repair Manual > Control arms and struts: Replacing left or right trailing arm
IMPORTANT:
The trailing arm must be installed with the opening (U-section) facing downward!
If the trailing arm is bent, the control arm/wheel carrier screw connection must be
renewed.
Necessary preliminary work:
Only on left side at ride height sensor: Release JOINTE ...