BMW X3 Service & Repair Manual: Mandrel

BMW X3 Service & Repair Manual / Driveline+Axles / Propeller shaft / Mandrel

Mandrel Mechanical tool

NOTE: (Drift) For removing the guide bearing from the propeller shaft

Storage Location

A14

SI number

01 05 90 (207)

Driveline+Axles

NOTE: (drift) For fitting the crankshaft guide bearing

Storage Location

A15

SI number

01 05 90 (207)

Driveline+Axles

MEASURING DEVICE

Measuring device Mechanical tool

NOTE: (Measuring device) inclination measuring device For measuring the propeller shaft deflection angle. The inclination measuring device was developed for the topics: Vibration and acoustic problems in the drive train (problem vehicles in the dealer organisation).

Driveline+Axles

PLATE

Plate Mechanical tool

NOTE: (Attachment plate) For determining the deflection angle on the final drive

Driveline+Axles

RAIL

Rail AM

Driveline+Axles

SCREW

Screw AM

NOTE: (Knurled screws)

Driveline+Axles

SHAPED PART

Shaped part AM

NOTE: (Shaped part) For mounting the transmission/transmissions: A5S 310Z

Driveline+Axles

Gauge

Gauge AM NOTE: For aligning the propeller shaft centre bearing Consisting of: 1. Rail 2. Gauge NOTE: (Gauge) 3. Wedge NOTE: (Chock) ...

Spindle

Spindle AM NOTE: (Spindle with rotary handle) NOTE: With synchronising key, transmission: All WASHER Washer Mechanical tool Replace ...

Other materials:

BMW X3 Owners Manual > HDC Hill Descent Control: Activating HDC
Press button; the LED above the button lights up. Deactivating HDC Press button again and the LED goes out. HDC is automatically deactivated above approx. 37 mph/60 km/h. Display in the instrument cluster The selected speed is displayed in the speedometer. Green: the system is ...