BMW X3 Service & Repair Manual: Spring tensioner

Spring tensioner Minimum set: Mechanical tools AM

Replaced by: 83302213022

NOTE: Basic device will receive a new order number as of July 2011

Storage Location

Individual

SI number

01 16 11 (738)

Consisting of:

1. Spring tensioner

NOTE: Basic device will be delivered under a new order number 83 30 2 213 022 beginning in July 2011.

2. Pin

NOTE: Spare part set for basic device (2 locking pins and 1 O-ring) will be available under a new order number 83 30 2 213 023 as of July 2011

Spring tensioner Mechanical tool

NOTE: Basic device incl. 2 locking pins and 1 O-ring, safety information and operating instructions. Corresponds to previous special tool number 31 3 340/31 3 341

SI number

01 16 11 (738)

Spring tensioner Minimum set: Mechanical tools AM

NOTE: Basic device will be delivered under a new order number 83 30 2 213 022 beginning in July 2011. Spare part (2 locking pins and 1 O-ring) is being delivered under a new order number 83 30 2 213 023

SI number

01 16 11 (738)

Spring tensioner AM

NOTE: (Spring tensioner without spring retainer)

Spring tensioner AM

Replaced by: 83300493555

NOTE: (Spring tensioner and spring retainer) For tensioning coil springs when removing and installing spring strut. Use only on the front axle. Exception: On E38 and E39 front and rear axle Replaced by 31 3 340. (0 493 555)

SI number

01 02 90 (168)

Consisting of:

1 = Spring tensioner

NOTE: (Spring tensioner without spring retainer) Discontinuation and replaced by 31 3 350. (0 493 560)

2 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 127 - Model series: E32, E34 Touring, E36 Discontinuation and replaced by 31 3 350. (0 493 560)

3 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 128 - Model series: E31, E38, E39 front high (2x) and basic version (1x) Discontinuation and replaced by 31 3 350. (0 493 560)

4 = Ring

NOTE: (Spring retainer) With insert ring 31 3 101 only for series E46/without insert ring 31 3 101 for series E31, E39 front basic version Discontinuation and replaced by 31 3 350. (0 493 560)

5 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 126 - model series: E38 rear, E39 Saloon rear Discontinuation and replaced by 31 3 350. (0 493 560)

6 = Insert

NOTE: (Protective insert) For spring retainer 31 3 125 Discontinuation and replaced by 31 3 350. (0 493 560)

7 = Insert

NOTE: (Protective insert) For spring retainer 31 3 122 Discontinuation and replaced by 31 3 350. (0 493 560)

8 = Insert

NOTE: (Protective insert) For spring retainer 31 3 123 and 31 3 129 Discontinuation and replaced by 31 3 350. (0 493 560)

9 = Holder

NOTE: (Spring retainer) With protective insert 31 3 128 - model series: E46 Discontinuation and replaced by 31 3 350. (0 493 560)

11 = Ring

NOTE: (Insert ring) For centring the spring strut in the spring retainer 31 3 124 - model series: E46

Spring tensioner Minimum set: Mechanical tools Mechanical tool

NOTE: Complete set with newly defined delivery specification. As of 08/2011, replaces set 31 3 350 and 31 3 360.

SI number

01 16 11 (738)

Spring tensioner AM

NOTE: (Spring tensioner and spring retainer) For tensioning coil springs when removing and installing spring strut. Use only on the front axle. Exception: On E38 and E39 front and rear axle Replaced by 31 3 340 (0 493 555) 31 3 350 (0 493 560)

SI number

01 15 98 (344)

Consisting of:

1 = Spring tensioner

NOTE: (Spring tensioner without spring retainer)

2 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 327 - Series: E32, E34, E36

3 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 328 - Series: E31, E38, E39 front high (2x) and basis (1x)/model: Z3, Z3coupe

4 = Ring

NOTE: (Spring retainer ring) With centering ring 31 3 331 only for series E46/Without centering ring 31 3 331 for series E31, E39 front basis/model: Z3, Z3coupe

5 = Holder

NOTE: (Spring retainer (2 pieces)) With protective insert 31 3 326 - Series: E38 rear, E39 Saloon rear

6 = Insert

NOTE: (Protective insert) For spring retainer 31 3 325

7 = Insert

NOTE: (Protective insert) For spring retainer 31 3 322

8 = Insert

NOTE: (Protective insert) For spring retainer 31 3 323

9 = Holder

NOTE: (Spring retainer) With protective insert 31 3 332 - Series: E46

1 = Ring

NOTE: (Centering ring) For centering the spring strut in the spring retainer ring 31 3 324 - Series: E46

2 = Insert

NOTE: (Protective insert) For spring retainer 31 3 329

Spring tensioner AM

Replaced by: 83300493560

NOTE: (Spring tensioner without spring retainer) Discontinuation and replaced by 31 3 350. (0 493 560)

Spring tensioner AM

Replaced by: 83300493555

NOTE: Replaced by 31 3 340 (0 493 555)

SUPPORT

Support AM

NOTE: (Telescope supports) 4 pieces, no longer available separately, only via special tool set 31 5 250 (83 30 0 495 567)

SI number

01 24 06 (309)